Anything Mechanical Needs To Be Lubricated: How To Maintain Your RV’s Slide Out
Mechanical parts, in general, should always be properly lubricated, and the slide out is no exception. We recommend that you apply a dry lube; however, some may also suggest a light lithium grease– but no matter what, be sure to check with your RV manufacturer before applying anything. Beyond that, be careful when using grease on slide outs. They can gather dust and other things pretty easily, so it may be important to clean them regularly.
When applying any sort of lubrication, on hydraulic rams and cylinders, be sure to completely wipe down and clean the parts. You don’t want to see any remnants left over from the lubrication process.
Some Preventative Maintenance: How To Maintain Your RV’s Slide Out
- Keep your 12-volt DC battery bank maintained.
- Make sure all galley components (like propane lines, water tubing, flexible drain piping, etc.) are supported and protected.
- Keep the upper and lower exterior side vents clear from obstructions.
- Clean and lubricate all moving components regularly.
- Check hydraulic fluid levels regularly.
- Keep a look-out for abnormal wear-patterns on the interior floor of the slide out.
- Listen for any moans or groans when moving slide out.
- Do not keep the slide outs extended for a long period of time.
Adjusting Slide Out Rooms: How To Maintain Your RV’s Slide Out
No matter what, every slide out should be centered within the opening. Each slide out has vertical, horizontal, and lateral adjustment points and they’ll all vary. We don’t recommend any RV owners to adjust slide outs on their own. However, it’s okay to measure their positions every now and then to determine whether they have shifted or not. It’s not uncommon for slide outs to move out of adjustment over time due to some of the factors we’ve already discussed. Remember though, if you suspect any misalignment take it to an RV shop like 24/7 MotorCoach Service Center, immediately.
WE OFFER SLIDE OUT WIPER SEAL SERVICE – FROM $150.00
- Inspect slide out seals for wear, tear or damage
- Apply U.V. treatment conditioner to exterior slide out seals to extend the seal life, which will reduce wear, tear & repel rain
- Inspect slide out seams, sealants, rollers & hardware
- Lube slide rams, cables & motor (where accessible)
- *Additional charge for slideout-toppers
24/7 MotorCoach Service Center
3930 W. Windmill Lane #130-B
Las Vegas Nevada 89139
702-757-2471
Comments